My Cart

Close

Tutorial: How to use GameSir T4 Pro


1. Connecting to Nintendo Switch

  1. Click into Controllers 
  2. Select Change Grip/Order 
  3. Press Y+Home to turn on the T4 pro
  4. T4 pro is connected now

 


    2. Connecting to Android Phone

    1. Press A+Home to turn on GameSir T4 pro
    2. Turn on the Bluetooth
    3. Search GameSir T4 pro and pair
    4. T4 pro is connected now

     


    3. Connecting to iPhone

    1. Press B+Home to turn on the T4 pro
    2. Turn on the Bluetooth
    3. Search for Xbox Wireless Controller and pair
    4. T4 pro is connected now

     


    4. Connecting to MacBook

    1. Press Select+Home to turn on T4 pro
    2. Turn on the Bluetooth
    3. Search for GamepadX and pair
    4. T4 pro is connected now

     


    5. Install Phone Holder & Set Turbo


    Part 1: Install the phone holder:

    Push in the opposite direction indicated by the arrow


    Part 2: Remove the phone holder:

    Push hard in the direction of the arrow


    Part 3: Set Turbo function:

    1. Press the A+Home switch (if you use an Android device)
    2. Connect T4 pro and your phone via Bluetooth
    3. Select and press any button+Turbo
    4. The backlight of the right joystick flashes red, the setting is complete
    5. In this video, the A button is for jumping. After setting the Turbo function, press and hold the A button to jump continuously

     


    6. Program Back Buttons


    Part 1: Connection

    1. Press the A+Home switch (if you use an Android device)
    2. Connect T4 pro with your phone via Bluetooth

    Part 2: Triggered at the same time

    1. Press any M button+Select to enable programming mode
    2. Back light of right joystick will turns blue and red
    3. Press two buttons you want to trigger at the same time for a while
    4. Then release them
    5. Press M button to confirm
    6. Back light of right joystick turns blue means done
    7. Now press M2 to trigger A+LT at the same time

    Part 3: Triggered in sequence

    1. Press any M button+Start to enable programming mode
    2. Back light of right joystick will turns blue and red
    3. Press one button first and then release
    4. Press the next button and then release
    5. Press M button to confirm
    6. Back light of right joystick turns blue means done
    7. Now press M2 to trigger A and LT in sequence

    gamesir_payment_type

    x