Tutorial: How to connect X3 Pro


    •  

     

     

     

     Connection

    1. Align the Type-C connector with the phone's port
    2. Extend the controller and place the phone
    3. Collapse the controller to complete the connection

     

    Connection Status

    Controller Status

    Indicator Description

    Connection successful

    Mode indicator stay solid

    Connection unsuccessful

    Mode indicator flashes for 30 seconds then turns off

    Pass-through charging successful

    Charging indicator stay solid

    Controller provides extra power but pass-through charging not enabled

    Charging indicator flashes for 10 seconds then turns off

    Cooler enabled

    Cooler indicator stay solid

    *Some Android phones need to enable the OTG function to power and use the controller.

     

    Basic Operation

    Power On

    Connect the device to the moveable Type-C connector to automatically power on.

    Power Off

    Long press the Home button for 5 seconds to power off.

    Standby

    The controller will automatically power off if there is no operation for 10 minutes while connected.

    In standby mode, press any button among A/B/X/Y/Home to wake up the controller.

    Pass-through Charging

    When connected to the device, the phone can be charged via the Type-C port at the bottom of the controller, and the charging indicator will display a white light effect during charging.

     

    Platform and Mode

    Platform

    Mode

    Indicator

    Switch Method

    Android/iOS

    DS5

    White

    Long press  for 2 seconds

    Android

    Android

    Dark Blue

    G-Touch

    Light Blue

    Via GameSir App

     

    Stick Calibration

    1. Simultaneously press  to enter calibration mode. When the mode indicator flashes white, it indicates successful entry into calibration mode.

    2. Rotate the left and right sticks fully three times. Finally, press  to exit calibration mode, and the mode indicator will return to its original mode color.

     

    Gyroscope calibration

    Place the controller horizontally on a flat surface and press  until the mode indicator flashes red and blue. When the mode indicator returns to mode color, the calibration is complete.