GameSir X1 FPS DOCK Firmware Update Tutorial for Android
1.The devices used for GameSir X1 FPS DOCK firmware update must be Android phones / tablets with non-MTK-chip.
2.Please fully charge GameSir X1 and Android device before the update.
3.If the current firmware version of GameSir X1 is lower than 3316, update the firmware to version 3316 with GameSir G-Crux APP.
4.The FPS DOCK firmware update includes two parts: Bluetooth firmware update and MCU firmware update.
Step 1 Turn on Bluetooth on your Android device and connect to GameSir X1.
Step 2 Launch FPS DOCK APP and click “Keep running in background”, when “New firmware detected, ready for upgrade ****” prompt pops up, please click “Confirm” button.
Step 3 Do not turn off the X1 or phone screen during the firmware update, otherwise X1 will be damaged. It takes 5-10 minutes for the firmware update. Please click “Confirm” button after the update is complete.
Step 4 Disconnect X1 and delete the pairing data of X1 in Bluetooth setting. Then turn off FPS DOCK APP in the background.
Step 5 Press X1 power button for 2 seconds, then press the power button for 0.5 second once again to turn off X1. Finally, press the power button for 2 seconds to restart X1.
Step 6 Connect X1 to Android device via Bluetooth and launch FPS DOCK APP. The APP will automatically upgrade MCU firmware. It takes 3-5 seconds, click “Confirm” button after the upgrade is complete.
Step 7 Disconnect X1 and delete the pairing data of X1 in Bluetooth setting. Turn off FPS DOCK APP in the background. Then restart X1, the FPS DOCK firmware update is complete.