My Cart

Close

Tutorial: How to Use GameSir G5


  • Jump to

    iOS User

    > First Connection

    > Firmware Upgrade

    > Connection Help

    Android User

    > First Connection

    > Start Gaming and Apply Configs


    iOS User

    First Connection

    1. Open the Bluetooth

    2. Turn on the GameSir G5

    iOS 12.2 or higher: Press “2+ Power button” to turn on the G5, the LOGO indicator flashes in purple.

    iOS 12.2 or lower: Press “3+Power button” to turn on the G5, the LOGO indicator flashes in pink. The next time you connect, the G5 will automatically connect, no need to use the key combination to turn on.

    3. Go to G-Crux, click on the menu in the upper left corner of the "Device" page, select "G5", click "Connect"

    Add a Config and Start Gaming

    1. After G5 is successfully connected, enter the G5 page, click the “G-Touch” icon, find the game you want to customize the configuration, click “Configure” to enter the configuration interface.

    2. Select the "official" configuration in the list, and select the corresponding mobile phone model, click "Save and Enable", then you can enter the game.


    Firmware Upgrade

    Step 1 Bluetooth Connection

    Step 2 Upgrade the Firmware

    Step 3 Upgrading

    Step 4 Correct the Joystick


    Connection Help

    Bluetooth Connection

    1. Turn on the Bluetooth

    2. Turn on the GameSir G5

    iOS 12.2 or higher: Press “2+ Power button” to turn on the G5, the LOGO indicator flashes in purple.

    iOS 12.2 or lower: Press “3+Power button” to turn on the G5, the LOGO indicator flashes in pink.

    The next time you connect, the G5 will automatically connect, no need to use the key combination to turn on.

    LOGO flash but can’t connect

    1. Check the Bluetooth

    2. My devices-->Click the “!”

    3. Forget this device

    4. If this doesn’t work, try to reboot the phone and try again.

    LOGO stay light but can’t connect

    1. Check if the G5 is connecting with another device, turn off that phone’s Bluetooth.

    No lights on

    2. Try again but after a fully charge.


    Android User


    First Connection

    1. Turn on the Bluetooth of your phone.

    2. Press “1+ Power button” to turn on the G5, the LOGO indicator flashes in yellow.

    3. Open GameSir World to connect the G5, the LOGO indicator will stay on when after successfully connect.


    Start a Game and Apply a Config

    1. Open the GameSir World, search and add the game you want, then click the game icon and click G-Touch Start to start the game.

    2. Click the pop-up to apply the config and save to accessory.

    3. Start gaming and enjoy it.

    gamesir_payment_type

    x