Copy of Tutorial : How to use GameSir remapper A3
READ BEFORE USE
To activate mapping is to resolve the analogue stick and touchscreen not working at the same time, which is caused by launching G-touch or G-engine on Android devices. In a word, this is stable and fast solution to launch games.
Before activation you need to
Step 1 Download GameSir World App.
Step 2 Turn on [Display pop-up window] in GameSir World
[Additional Settings]>[App permission]>[GameSir World]>[Display pop-up window]
Step 3 Turn on [USB Debug mode]
[Additional Settings]>[Developer options]>[USB debugging]
Step 4 Choose USB Mode
[System]>[Developer options]>[Default USB Transfer Mode]>[No data transfer].
NOTE: If your mobile phone is Miui 8.0 or higher, you need to turn on [USB Security Setting]; if your mobile phone is Hauwei 7.0 or higher, turn on [Allow ADB debugging in charge only mode].
How To Do Activation
Step 1 Plug A3 into the port of the 5V charger, then A3 indicator will stay red.
Step 2 Connect A3 to the mobile phone via USB cable(as following picture shows).
Step 3 If the connection is completed, the on-screen will read “Allow USB debugging?”; click “OK”, and A3 will flash in green and be activated.
Step 4 When the activation is completed, A3 indicator will stay half-red and half-green, and GameSir World App will read “Mapping starts successfully”, then A3 can be removed.
Step 5 After Mapping activated, you can connect controllers to the mobile phone via GameSir World App.
NOTE: If your Android phone is powered off, and it need activating after powering on.-->